开闭件工程师岗位职责（2篇范文）

发布时间：2024-11-25 查看人数：21

目录
第1篇开闭件工程师岗位职责第2篇车身开闭件工程师岗位职责

开闭件工程师岗位职责

第1篇开闭件工程师岗位职责

开闭件工程师上海伊狄达汽车技术服务有限公司上海伊狄达汽车技术服务有限公司,伊狄达 main responsibilities主要职责:

1. be responsible for biw & closure 2d/3d part design, according to suggestion from cae/craft analysis department to modify product structure and craft;

负责biw/隔板的2d/3d部分的设计,根据cae/工艺分析部门给出的建议去修改产品结构和工艺;

2. be responsible for layout &performance design, checking and making proposals about biw system accessories and closure system, hinge ,check arm , sealing system, latch system, regulator, gas spring and other accessories;

负责biw系统附件及隔板系统、铰链、止回臂、密封系统、锁止系统、调节器、气弹簧等附件的布置及性能设计、校核及建议;

3. be responsible for preparation, review the bom, bop, typical section, gd&t, parts description, design report and other technical documents;

负责bom,bop,典型断面,gd&t,零件说明,技术报告等技术文件的编制、审核;

4. design , checking and motion analysis by using catia or ug software and etc.;

使用catia或者ug等软件去设计,校对以及动作分析;

5. design and release closure parts;

设计和发布隔板的部分;

6. be responsible for tracking and solving prototype vehicle and related parts manufacturing, trial production& process validation, production preparation and pre-pilot of the on-site technical support service.

负责跟踪解决原型车及相关零部件的制造、试制和工艺验证、生产准备和现场技术支持服务的预试。

job requirements职业要求:

1. vehicle, or mechanical major etc. with college degree or above, above 5 years of closure design experience in large or medium auto enterprises, design company preferred;

大专及以上车辆、机械等相关专业,五年以上中大型企业隔板设计经验,设计公司优先;

2. work experience of the tailgate and active bonnet system preferred;

有尾门和主动阀盖系统工作经验者优先;

3. knowledge of the main constrains of the process: stamping / welding /painting/ assembly line;

了解冲压/焊接/喷漆/装配线工艺的主要约束条件;

4. proficient in catia or ug etc.;

熟练使用catia或ug等软件;

5. good computer skills and english level;

良好的计算机技能和英语水平;

6. open mind and team work with people from different cultures,work seriously and responsibly;

思维开放并且可以和来自不同文化的人团队协作,工作认真负责;

7. able to travel on short notice and work outside for business related travel.